Anomalie #1321
Opium : backtraces frequentes dans les syslogs et état SMART d'un des disques
Début:
29/06/2013
Echéance:
% réalisé:
100%
Temps estimé:
Difficulté:
2 Facile
Description
De plus en plus fréquemment, l'on voit syslog qui écrit via wall sur les terminau des messages de ce type :
Toujours lié à "/sys/devices/virtual/block/vroot7/stat"
kernel:[117500.193975] general protection fault: 0000 [#301] SMP Message from syslogd@opium at Jun 29 00:21:24 ... kernel:[117500.194060] last sysfs file: /sys/devices/virtual/block/vroot7/stat Message from syslogd@opium at Jun 29 00:21:24 ... kernel:[117500.197068] Stack: Message from syslogd@opium at Jun 29 00:21:24 ... kernel:[117500.197570] Call Trace: Message from syslogd@opium at Jun 29 00:21:24 ... kernel:[117500.197947] Code: fa 66 66 90 66 66 90 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
Dans les syslogs, on trouve des messages de ce type :
[117727.112851] general protection fault: 0000 [#377] SMP [117727.112935] last sysfs file: /sys/devices/virtual/block/vroot7/stat [117727.112966] CPU 2 [117727.113020] Modules linked in: cryptd aes_x86_64 aes_generic xts gf128mul ses enclosure usb_storage tun ipt_LOG xt_tcpudp ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ext4 jbd2 crc16 ext2 dm_crypt firewire_sbp2 loop snd_hda_codec_atihdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcsp asus_atk0110 parport_pc snd_pcm edac_core i2c_piix4 parport snd_timer edac_mce_amd processor i2c_core shpchp button evdev snd soundcore snd_page_alloc pci_hotplug ext3 jbd mbcache dm_mod raid456 md_mod async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx ide_cd_mod sd_mod cdrom crc_t10dif ide_pci_generic ohci_hcd ata_generic ahci thermal r8169 mii atiixp ehci_hcd ide_core firewire_ohci usbcore firewire_core nls_base crc_itu_t floppy thermal_sys libata scsi_mod [last unloaded: scsi_wait_scan] [117727.115436] Pid: 11837, comm: munin-node Tainted: G D W 2.6.32-bpo.3-vserver-amd64 #1 System Product Name [117727.115470] RIP: 0010:[<ffffffff810f0f6c>] [<ffffffff810f0f6c>] __kmalloc+0xd2/0x141 [117727.115533] RSP: 0018:ffff88008b103b88 EFLAGS: 00010082 [117727.115564] RAX: 0000000000000000 RBX: 940f003e8348c031 RCX: 0000000000000020 [117727.115597] RDX: ffff880005111f00 RSI: 00000000000000d0 RDI: ffffffff811308e1 [117727.115630] RBP: 0000000000000246 R08: 0000000000000000 R09: 0000000000000000 [117727.115663] R10: 00000000000001c0 R11: ffff88008b103b38 R12: ffffffff8144c4f0 [117727.115696] R13: 00000000000000d0 R14: 00000000000000d0 R15: 000000000000001c [117727.115730] FS: 00007ff34f358700(0000) GS:ffff880005100000(0000) knlGS:0000000000000000 [117727.115763] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [117727.115794] CR2: 00007ff34e3d8050 CR3: 0000000110aee000 CR4: 00000000000006e0 [117727.115828] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [117727.115861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [117727.115895] Process munin-node (pid: 11837, threadinfo ffff88008b102000, task ffff88011c2f1590) [117727.115928] Stack: [117727.115957] 00000000000001c0 ffffffff811308e1 00000020811306f0 ffff880052445238 [117727.116068] <0> 00000000000001c0 00000000fffffff8 ffffffff811306f0 00000000fffffff4 [117727.116232] <0> 0000000000000001 ffffffff811308e1 ffff88010dc17d00 0000000000000080 [117727.116424] Call Trace: [117727.116456] [<ffffffff811308e1>] ? load_elf_binary+0x1f1/0x1958 [117727.116488] [<ffffffff811306f0>] ? load_elf_binary+0x0/0x1958 [117727.116519] [<ffffffff811308e1>] ? load_elf_binary+0x1f1/0x1958 [117727.116551] [<ffffffff810f7cd9>] ? do_sync_read+0xce/0x113 [117727.116583] [<ffffffff812fdc17>] ? __down_read+0x15/0xab [117727.116615] [<ffffffff81065a0e>] ? autoremove_wake_function+0x0/0x2e [117727.116648] [<ffffffff811306f0>] ? load_elf_binary+0x0/0x1958 [117727.116680] [<ffffffff810fc5a6>] ? search_binary_handler+0xb4/0x245 [117727.116712] [<ffffffff8112f0fc>] ? load_script+0x0/0x1ec [117727.116743] [<ffffffff8112f2bd>] ? load_script+0x1c1/0x1ec [117727.116775] [<ffffffff810fc1ba>] ? get_arg_page+0x4b/0xa4 [117727.116807] [<ffffffff810fc5a6>] ? search_binary_handler+0xb4/0x245 [117727.116815] [<ffffffff810fda14>] ? do_execve+0x1e8/0x2dc [117727.116815] [<ffffffff8100f4eb>] ? sys_execve+0x35/0x4c [117727.116815] [<ffffffff81010f9a>] ? stub_execve+0x6a/0xc0 [117727.116815] Code: fa 66 66 90 66 66 90 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83 [117727.116815] RIP [<ffffffff810f0f6c>] __kmalloc+0xd2/0x141 [117727.116815] RSP <ffff88008b103b88> [117727.116815] ---[ end trace 721a8e84d9e66c0b ]---
Dans les processus cités dans ces traces, on voit un peu de tout : munin-node (beaucoup), nrpe (2 fois), bash (1 fois), ntp_kernel_pll_...
Ça sent le problème matériel.
En plus de ça, le smart de /dev/sdc est dans un état assez triste :
root@opium:~# smartctl -a /dev/sdc
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST31000528AS
Serial Number: 5VP4GSKE
Firmware Version: CC38
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Jun 29 00:33:08 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 185) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 120470406
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 280
5 Reallocated_Sector_Ct 0x0033 096 096 036 Pre-fail Always - 198
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 633051438
9 Power_On_Hours 0x0032 069 069 000 Old_age Always - 27454
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 140
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 088 088 000 Old_age Always - 12
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 42950328331
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 051 036 045 Old_age Always In_the_past 49 (34 33 54 39)
194 Temperature_Celsius 0x0022 049 064 000 Old_age Always - 49 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 041 013 000 Old_age Always - 120470406
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 272176372542530
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2042468901
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1485209532
SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 12 occurred at disk power-on lifetime: 26972 hours (1123 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 7d+12:48:02.411 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 7d+12:48:02.411 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+12:48:02.410 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+12:48:02.410 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 7d+12:48:02.390 READ NATIVE MAX ADDRESS EXT
Error 11 occurred at disk power-on lifetime: 26972 hours (1123 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 7d+12:47:59.230 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 7d+12:47:59.230 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+12:47:59.229 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+12:47:59.229 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 7d+12:47:59.210 READ NATIVE MAX ADDRESS EXT
Error 10 occurred at disk power-on lifetime: 26972 hours (1123 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 7d+12:47:56.067 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 7d+12:47:56.066 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+12:47:56.066 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+12:47:56.065 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 7d+12:47:56.046 READ NATIVE MAX ADDRESS EXT
Error 9 occurred at disk power-on lifetime: 26972 hours (1123 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 7d+12:47:52.895 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 7d+12:47:52.894 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+12:47:52.894 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+12:47:52.893 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 7d+12:47:52.874 READ NATIVE MAX ADDRESS EXT
Error 8 occurred at disk power-on lifetime: 26972 hours (1123 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 7d+12:47:49.748 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 7d+12:47:49.747 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+12:47:49.746 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+12:47:49.746 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 7d+12:47:49.727 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Il faudrait vérifier si cela est lié. et le cas échéant, prendre des mesures.
Demandes liées
Historique
Mis à jour par Quentin CHERGUI il y a presque 11 ans
Ces messages sont apparus cet après-midi, depuis la tentative de rsync du contenu d'Opium sur le disque dur externe tout neuf ("sdd").
Une nouvelle erreur s'est produite en tentant de faire un ls depuis Opium sur le contenu de ce disque :
Erreur de segmentation Message from syslogd@opium at Jun 29 00:39:14 ... kernel:[118568.648919] general protection fault: 0000 [#526] SMP Message from syslogd@opium at Jun 29 00:39:14 ... kernel:[118568.649014] last sysfs file: /sys/devices/virtual/block/vroot7/stat root@opium:/media/backup0# Message from syslogd@opium at Jun 29 00:39:14 ... kernel:[118568.652876] Stack: Message from syslogd@opium at Jun 29 00:39:14 ... kernel:[118568.652876] Call Trace: Message from syslogd@opium at Jun 29 00:39:14 ... kernel:[118568.652876] Code: fa 66 66 90 66 66 90 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
Le disque externe n'avait pas posés de soucis à l'utilisation sur mon propre PC juste evant.
Mis à jour par Loïc Dachary il y a presque 11 ans
Opium venant d'être déménagée, ça vaut le coup de
- Ouvrir et s'assurer que tout est bien en place ( cartes, barrettes mémoire et les pousser bien a fond )
- Faire un memtest
L'important est de faire un backup avant d'essayer des manipulation de restauration lourdes.
Mis à jour par Loïc Dachary il y a presque 11 ans
- Sujet changé de Opium : backtraces frquentes dans les syslogs et état SMART d'un des disques à Opium : backtraces frequentes dans les syslogs et état SMART d'un des disques
Mis à jour par Quentin CHERGUI il y a presque 11 ans
État smart des deux autres disques (pour avoir les marques et modèles) :
sda :
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT series
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJ90Z206594
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Mon Jul 1 16:21:27 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13950) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 233) minutes.
Conveyance self-test routine
recommended polling time: ( 25) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 079 079 011 Pre-fail Always - 7120
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 156
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 27516
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 156
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 049 000 Old_age Always - 42 (Lifetime Min/Max 33/48)
194 Temperature_Celsius 0x0022 058 045 000 Old_age Always - 42 (5 2 51 33)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 260901832
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdb :
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2930HQ1NPUSH
Firmware Version: JP4OA39C
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Mon Jul 1 16:25:32 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 095 095 016 Pre-fail Always - 458760
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 100
3 Spin_Up_Time 0x0007 122 122 024 Pre-fail Always - 303 (Average 315)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 92
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 27099
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 92
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 428
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 428
194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 48 (Lifetime Min/Max 17/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mis à jour par Quentin CHERGUI il y a presque 11 ans
- Catégorie mis à Task
- Statut changé de Nouveau à En cours de traitement
- Assigné à mis à Quentin CHERGUI
- % réalisé changé de 0 à 50
Après un premier reboot reboot, plus aucune trace de ce message dans les logs.
Après le changement d'alimentation (voir https://agir.april.org/issues/1099#note-10 ) : rsync e cours sur le disque USB dans les mêmes conditions, pas de problèmes visibles.
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
- Version cible changé de Juin 2013 à Juillet 2013
Après la dernière coupure d'Opium, l'état SMART du disque, l'état smart du disque s'est dégradé, avec non seulement de nouvelles erreurs de lecture ( qu'il n'y avait plus depuis un petit moment sur ce disque) mais surtout avec l'augmentation considérable du nombre de secteurs réalloués qui était resté stable :
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12 family
Device Model: ST31000528AS
Serial Number: 5VP4GSKE
Firmware Version: CC38
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Aug 14 11:53:19 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 185) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 94119349
3 Spin_Up_Time 0x0003 096 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 330
5 Reallocated_Sector_Ct 0x0033 008 008 036 Pre-fail Always FAILING_NOW 3770
7 Seek_Error_Rate 0x000f 088 060 030 Pre-fail Always - 711308360
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28542
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 165
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 070 070 000 Old_age Always - 30
188 Command_Timeout 0x0032 099 099 000 Old_age Always - 55835426830
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 049 036 045 Old_age Always In_the_past 51 (36 156 51 51)
194 Temperature_Celsius 0x0022 051 064 000 Old_age Always - 51 (0 16 0 0)
195 Hardware_ECC_Recovered 0x001a 035 013 000 Old_age Always - 94119349
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 4
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 232679853289631
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2522232686
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1017756513
SMART Error Log Version: 1
ATA Error Count: 30 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 30 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 19d+06:00:53.080 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 19d+06:00:53.080 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 19d+06:00:53.079 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 19d+06:00:53.079 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 19d+06:00:53.060 READ NATIVE MAX ADDRESS EXT
Error 29 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 19d+06:00:49.900 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 19d+06:00:49.900 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 19d+06:00:49.899 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 19d+06:00:49.899 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 19d+06:00:49.872 READ NATIVE MAX ADDRESS EXT
Error 28 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 19d+06:00:46.695 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 19d+06:00:46.694 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 19d+06:00:46.693 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 19d+06:00:46.693 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 19d+06:00:46.674 READ NATIVE MAX ADDRESS EXT
Error 27 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 19d+06:00:43.497 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 19d+06:00:43.497 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 19d+06:00:43.496 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 19d+06:00:43.496 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 19d+06:00:43.477 READ NATIVE MAX ADDRESS EXT
Error 26 occurred at disk power-on lifetime: 28462 hours (1185 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 39 59 1b 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 35 59 1b 40 00 19d+06:00:40.335 READ FPDMA QUEUED
60 00 10 3d 59 1b 40 00 19d+06:00:40.334 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 19d+06:00:40.334 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 19d+06:00:40.333 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 19d+06:00:40.333 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
État smart des deux autres disques :
root@opium:~# smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT series
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJ90Z206594
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Wed Aug 14 12:41:58 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13950) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 233) minutes.
Conveyance self-test routine
recommended polling time: ( 25) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 083 083 011 Pre-fail Always - 5880
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 181
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 28540
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 181
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 055 049 000 Old_age Always - 45 (Lifetime Min/Max 45/46)
194 Temperature_Celsius 0x0022 055 045 000 Old_age Always - 45 (5 87 46 45)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 289397
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
et
root@opium:~# smartctl -a /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2930HQ1NPUSH
Firmware Version: JP4OA39C
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Aug 14 12:43:11 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 098 098 016 Pre-fail Always - 131074
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 97
3 Spin_Up_Time 0x0007 157 157 024 Pre-fail Always - 213 (Average 270)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 117
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28123
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 117
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 453
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 453
194 Temperature_Celsius 0x0002 122 122 000 Old_age Always - 49 (Lifetime Min/Max 17/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
Remplacemenrt du disque par le disque de spare, à la demande de madix et aeris :
Retrait du disque défectueux de la grappe raid5 :
root@opium:~# mdadm --manage /dev/md0 --set-faulty /dev/sdc
sdc sdc1 sdc2
root@opium:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sda2[0] sdc2[2] sdb2[1]
1952539904 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
unused devices: <none>
root@opium:~# mdadm --manage /dev/md0 --set-faulty /dev/sdc2
mdadm: set /dev/sdc2 faulty in /dev/md0
root@opium:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sda2[0] sdc2[3](F) sdb2[1]
1952539904 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
unused devices: <none>
root@opium:~# mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Fri May 21 17:11:20 2010
Raid Level : raid5
Array Size : 1952539904 (1862.09 GiB 1999.40 GB)
Used Dev Size : 976269952 (931.04 GiB 999.70 GB)
Raid Devices : 3
Total Devices : 3
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Wed Aug 14 13:42:42 2013
State : clean, degraded
Active Devices : 2
Working Devices : 2
Failed Devices : 1
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : cbec8b84:0b8195a7:1dd56112:69aa64ae
Events : 0.12118371
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
1 8 18 1 active sync /dev/sdb2
2 0 0 2 removed
3 8 34 - faulty spare /dev/sdc2
root@opium:~# mdadm --manage /dev/md0 --remove /dev/sdc2
mdadm: hot removed /dev/sdc2 from /dev/md0
root@opium:~# mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Fri May 21 17:11:20 2010
Raid Level : raid5
Array Size : 1952539904 (1862.09 GiB 1999.40 GB)
Used Dev Size : 976269952 (931.04 GiB 999.70 GB)
Raid Devices : 3
Total Devices : 2
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Wed Aug 14 13:44:22 2013
State : clean, degraded
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 64K
UUID : cbec8b84:0b8195a7:1dd56112:69aa64ae
Events : 0.12118424
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
1 8 18 1 active sync /dev/sdb2
2 0 0 2 removed
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
Reconstruction de la table des partitions, à l'aide de la précédente préalablement sauvegardée :
root@opium:~# sfdisk /dev/sdc < sfdisk-sdc Checking that no-one is using this disk right now ... OK Disk /dev/sdc: 121601 cylinders, 255 heads, 63 sectors/track sfdisk: ERROR: sector 0 does not have an msdos signature /dev/sdc: unrecognized partition table type Old situation: No partitions found New situation: Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/sdc1 63 979964 979902 82 Linux swap / Solaris /dev/sdc2 979965 1953520064 1952540100 fd Linux raid autodetect /dev/sdc3 0 - 0 0 Empty /dev/sdc4 0 - 0 0 Empty Warning: no primary partition is marked bootable (active) This does not matter for LILO, but the DOS MBR will not boot this disk. Successfully wrote the new partition table Re-reading the partition table ... If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).)
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
Reconstruction du RAID en cours :
root@opium:~# mdadm --manage /dev/md0 --add /dev/sdc2
mdadm: added /dev/sdc2
root@opium:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdc2[3] sda2[0] sdb2[1]
1952539904 blocks level 5, 64k chunk, algorithm 2 [3/2] [UU_]
[>....................] recovery = 0.0% (636032/976269952) finish=255.6min speed=63603K/sec
unused devices: <none>
Mis à jour par Quentin CHERGUI il y a plus de 10 ans
- Statut changé de En cours de traitement à Résolu
- % réalisé changé de 50 à 100
Reconstruction du RAID terminée :
root@opium:~# cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdc2[2] sda2[0] sdb2[1]
1952539904 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
unused devices: <none>
L'état de tous les disques à l'air bon :
root@opium:~# smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT series
Device Model: SAMSUNG HD103UJ
Serial Number: S13PJ90Z206594
Firmware Version: 1AA01118
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Wed Aug 14 19:35:23 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13950) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 233) minutes.
Conveyance self-test routine
recommended polling time: ( 25) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 081 081 011 Pre-fail Always - 6640
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 190
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 28546
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 190
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 053 049 000 Old_age Always - 47 (Lifetime Min/Max 30/47)
194 Temperature_Celsius 0x0022 054 045 000 Old_age Always - 46 (5 87 49 30)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 69989578
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@opium:~# smartctl -a /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.C
Device Model: Hitachi HDS721010CLA332
Serial Number: JP2930HQ1NPUSH
Firmware Version: JP4OA39C
User Capacity: 1 000 204 886 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Aug 14 19:35:40 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9929) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 65536
2 Throughput_Performance 0x0005 135 135 054 Pre-fail Offline - 97
3 Spin_Up_Time 0x0007 151 151 024 Pre-fail Always - 237 (Average 264)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 126
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 132 132 020 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 28129
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 126
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 462
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 462
194 Temperature_Celsius 0x0002 120 120 000 Old_age Always - 50 (Lifetime Min/Max 17/66)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@opium:~# smartctl -a /dev/sdc
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST1000DM003-1CH162
Serial Number: S1D8VZ9P
Firmware Version: CC46
User Capacity: 1 000 204 886 016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Aug 14 19:35:43 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 89) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 119) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 70464
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 319591
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 10
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 049 048 045 Old_age Always - 51 (Lifetime Min/Max 33/52)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 13
194 Temperature_Celsius 0x0022 051 052 000 Old_age Always - 51 (0 25 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 194836896415748
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1952677864
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 5206
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.